Laboratoire de chimie théorique (LCT)
Le Laboratoire de Chimie Théorique (LCT) développe une expertise en chimie théorique et quantique.Les recherches sont centrées sur la mise au point et l’application de méthodes pour évaluer et interpréter les propriétés responsables des phénomènes optiques et électriques dans les molécules, les assemblages supramoléculaires, les polymères et les cristaux moléculaires. Une majorité de ces études sont intégrées dans des projets de recherche multidisciplinaire ayant pour objectif la conception de nouveaux matériaux aux propriétés exceptionnelles.
Voir le contenu
Soutenance publique de thèse de doctorat en Sciences chimiques - Amélie MAERTENS
Jury
Prof. Benoît CHAMPAGNE (UNamur), présidentProf. Carmela APRILE (UNamur), secrétaireProf. Eric GAIGNEAUX (UCLouvain)Prof. Sonia FIORILLI (Politecnico di Torino)Prof. Wouter MARCHAL (UHasselt)
Abstract
Heterogeneous acid catalysts became over the years essential to our modern industrial world. Among the possible forms of solid materials with acidic properties, porous silica-based structures embedding active single-sites showed highly promising catalytic activity for various reactions. The insertion of heteroelements inside the SiO2 network is known to introduce a combination of Brønsted and Lewis acid sites which depends on the nature of the element and influences the catalytic properties of the solid. The present thesis investigates the link between the Brønsted/Lewis acid balance introduced by different elements (Al, Ga, In, Ti, Zr, Hf) inserted or finely dispersed in/onto the structure of extra-small silica nanospheres and the catalytic performances of the solids for two distinct biomass derivatives valorization reactions (i.e. conversion of glycerol to solketal and of ethyl levulinate to γ-valerolactone).The optimizations of the syntheses were particularly focusing on the insertion of the element inside the SiO2 matrix to maximize the number of acid sites. In-depth characterizations were conducted on the different substituted nanospheres to probe their morphological, structural, and textural features. A special attention was dedicated to the characterization of the surface acidity. These results were put into perspective with the catalytic performances of the materials. At the end of the investigations, we were able to explain the difference in terms of catalytic activity between the different studied solids and identify the optimal acid properties for the targeted reactions. The stability and recyclability of the best working solids were also assessed, an acute tuning of reaction conditions enabled to reach significatively high conversions, and their performances were tested in challenging conditions (i.e. close to crude feedstock).The knowledge unveiled through these investigations will give precious insight to design new silica-based catalysts with the appropriate acidity for a wide variety of acid-catalyzed reactions.
Voir le contenu
Laboratoire de Réactivité et Catalyse Organométallique (RCO)
L’équipe de recherche RCO (Réactivité et Catalyse Organométallique) est située au département de chimie de l’Université de Namur. Les chercheurs sont installés dans deux laboratoires de synthèse récemment équipés et un laboratoire de mesures physique et de spectroscopie. Des bureaux et une salle de réunion sont situés à côté des laboratoires, dans un espace dédié aux membres de l’équipe et aux étudiants.
Voir le contenu
SFMBBM PhD Day 2024
This event will be the perfect opportunity not only to discover the latest advances in the field of biological macromolecules research, but also to share knowledge, collaborate, as well as to showcase the outstanding work of PhD students. PhD students are encouraged to submit an abstract for an oral presentation and/or poster. Five talks will be selected on the basis of received abstracts and added to the final programme. Prizes will be awarded for the best oral presentation and the best poster at the end of the event.
More info about abstract submission and registration on the website
Voir le contenu
Soutenance publique de thèse de doctorat en Sciences chimiques - Gaetano RICCI
Jury
Prof. Catherine MICHAUX (UNamur), PrésidenteProf. Yoann OLIVIER (UNamur), secrétaireProf. Piotr DE SILVA (Technical University of Denmark)Prof. Daniel ESCUDERO MASA (KULeuven)Prof. Benoît CHAMPAGNE (UNamur)Prof. Luc HENRARD (UNamur)
Abstract
Organic Light Emitting Diodes (OLEDs) are now a well-established technology in modern electronic devices, from flexible TV screens to lighting applications. Each time we use our smartphone, billions of tiny molecules are electrically stimulated to emit the colorful light reaching our eyes. The ability of these molecules to convert electricity into light is the core principle of an OLED, and understanding the mechanisms behind this process can help improve their performance.Recently, two new families of triangular-shaped organic molecular systems, known as Multi-Resonant (MR) and Inverted Singlet-Triplet (INVEST) compounds, have shown promising features for OLED applications.In my PhD research, I used computational chemistry to explore the quantum mechanical effects that define the peculiar features of these systems.The first part of my thesis focused on identifying the correct computational protocol to properly describe the energy and nature of the singlet and triplet excited states of the INVEST compounds, highlighting the importance of methods including double excitations. With this information in our hands, we combined quantum chemistry and group theory to design new light-emitting INVEST compounds. Finally, we applied both static and dynamic approaches to describe the spin conversion processes in MR and INVEST systems, providing a comprehensive picture of their electronic and photophysical properties for next generation OLED applications.
Voir le contenu
Soutenance publique de thèse de doctorat en Sciences biologiques - Pauline CHERRY
Jury
Prof. Xavier DE BOLLE (UNamur), présidentProf. Jean-Yves MATROULE (UNamur) secrétaireDr Karrera DJOKO (Durham University)Dr Soufian OUCHANE (Paris-Saclay University)Dr Rob VAN HOUDT (SCK-CEN)
Abstract
The copper tolerance of the free-living bacteria Caulobacter crescentus depends on its dimorphic cell cycle. The sessile stalked cell detoxifies and effluxes copper through the multicopper oxidase PcoA and the Cu transporter PcoB respectively, while the swarmer cell senses and swims away from Cu sources. The transcriptional landscape of both morphotypes upon copper excess further confirms this. Among the few genes upregulated in both stalked and swarmer cells under copper excess, the CCNA_00027-00028 operon encodes a TonB-dependent receptor (TbcT) and a 2-oxoglutarate/Fe2+-dependent oxygenase (OxcT), respectively. The deletion of these two genes specifically increases the sensitivity towards Cu in C. crescentus. Interestingly, using a bioinformatics approach, we observed that the tbcT and oxcT genes co-occur in at least 67 % of bacteria containing a tbcT gene, and 88 % of bacteria containing an oxcT gene. The TbcT-OxcT system is not involved in the transport of copper nor the detoxification of copper-induced oxidative stress. Previous studies in C. crescentus and for homologous proteins showed that TbcT seems to be involved in iron import via siderophores, even though C. crescentus does not appear to synthesize siderophores. The overexpression of the tbcT gene appears to enhance the import of iron. OxcT activity is important for copper tolerance, although its specific activity has not yet been deciphered. Based on our results, we demonstrated that proper iron import is crucial for complete Cu tolerance, with the intracellular iron preventing copper accumulation. Taken together, our results argue for a tight coupling between iron and copper homeostasis in the context of copper tolerance.
Voir le contenu
Laboratoire de Chimie des Matériaux Appliqués (CMA)
Le laboratoire de chimie des matériaux appliqués (CMA) dirigé par le professeur Carmela Aprile est spécialisé dans la synthèse de matériaux et leurs applications catalytiques, avec une attention particulière pour les processus durables. L'une des forces du groupe est également représentée par les techniques de caractérisation avancées, en particulier la résonance magnétique nucléaire à l'état solide, qui est développée en étroite collaboration avec le Dr Luca Fusaro.
Voir le contenu
Laboratoire de Chimie des Matériaux Inorganiques (CMI)
Nos recherches visent à la conception, la synthèse, l'étude des propriétés et l'ingénierie moléculaire des nanostructures, des matériaux poreux auto-assemblés hautement organisés et hiérarchisés, des matériaux vivants bio-intégrés et bio-inspirés, y compris des matériaux en forme de feuilles par l'immobilisation d'organismes vivants et de biomatériaux pour la catalyse, la photocatalyse, la conversion du CO2 et la séparation de l'eau, le stockage et la conversion de l'énergie, la photosynthèse artificielle, la nanotechnologie, la biotechnologie, la technologie de l'information, la thérapie cellulaire et les applications biomédicales.
Voir le contenu
Laboratoire de Chimie Bio-Organique (CBO)
Le CBO est spécialisé en chimie organique en général, et plus particulièrement en glycosciences pour la synthèse multi étape de molécules organiques ou de sondes moléculaires visant des applications variées (biochimie, virologie, bactériologie, chimie médicinale, chimie verte et catalyse …).
Voir le contenu
Chimie et Electrochimie des Surfaces (CES)
Le Laboratoire de Chimie et d’Electrochimie des Surfaces (CES) a débuté ses activités en 1998 avec une orientation vers la chimie et l’électrochimie des matériaux de surface structurés.Le CES a pour objectif la conception de matériaux de surface et d'interface et leur fabrication par les procédés de la chimie en particulier l'électrochimie, l'auto-assemblage et la chimie douce. Ces matériaux de surface peuvent être des assemblages de films organiques et/ou inorganiques, minces ou ultra-minces, sur des substrats métalliques, des oxydes de métaux et des films polymères.
Voir le contenu
Equipe de recherche de Luc Henrard
Optique des matériaux et plasmoniqueLes recherches portent sur les propriétés structurales et optiques des nanomatériaux et des matériaux 2D sur base d’approches théoriques et de simulations numériques. Nous nous intéressons aux phénomènes physiques influençant les réponses optiques des matériaux et plus spécifiquement aux liens entre celles-ci et les excitations plasmoniques.Même si nos recherches sur l’importance des champs électromagnétique à l’échelle atomique ont un caractère principalement fondamental, nous sommes attentifs à garder un lien fort avec l’expérience et les applications. Au niveau technique, nous combinons l’électrodynamique classique (DDA) pour rendre compte des réponses optique et de perte d’énergie d’électrons des systèmes structurés et les méthodes quantiques (TB, DFT) pour étudier les propriétés électroniques des matériaux avec, dans certains cas, l’apport de l’intelligence artificiel.
Les publications
Toutes les publications de l'équipe sur le portail de la recherche.
Les recherches en cours
En savoir plus sur les recherches en cours dans l'équipe.
Composition de l'équipe de recherche
Promoteur (PI) : Luc HenrardLuc Henrard, membre du Département de physique, est également affilié aux Instituts naXys et NISM (Pôle de recherche HPC-MM). Voir le profil de Luc Henrard dans l'annuaire...Voir le profil de Luc Henrard sur le portail recherche...Post-doctorantsWaqas Zulfiqar Emerick Guillaume DoctorantsAylin Melan Hassen Haddad Alexandre Cloots en co-diplomation avec l'UCLouvain - Promoteur principal : Professeur Xavier Gonze.Collaborateurs scientifiquesMohamed Achehboune | Assistant Professor - UM6P, BenGuerir, MaroccoKhawla Chaoui | PhD Student - University of 8 Mai 1945 Guelma, AlgeriaPeter Vancso |Senior Scientist - Centre for Energy Research – Budapest, Hungary
Voir les anciens de l'équipe
Contact
Luc Henrard
+32 (0)81 72 54 85
luc.henrard@unamur.be
Voir le contenu
Equipe de recherche de Yoann Olivier
Notre recherche se concentre autour de la modélisation des propriétés opto-électroniques et mécaniques des matériaux semiconducteurs organiques. La compréhension de ces propriétés permet d’établir un lien structure-propriété et des règles de design à l’échelle moléculaire permettant une amélioration des performances de ces matériaux.
Voir le contenu